DC/DC Power Converter/Charger

Need to keep auxilliary batteries or your Durst Jump Starter charged when mobile or driving from job to job? Not a problem. Instead of charging direct from the vehicle’s alternator and in parallel with the vehicle’s battery/s, the Durst Power Converter/Charger will operate independently and drastically reduce the charge time for an auxilliary battery as compared to sharing the charge with the vehicle’s batteries and accessories. It will also assist to overcome voltage drop in a system where the battery/s being charged are a little way from the alternator or where you need to charge a 24V unit from a 12V system or vice versa.

Very handy for breakdown vehicles, mobile mechanics, boats or other applications where auxilliary batteries need to be re-charged that power accessories such as jump starters, refrigerators, computer systems, phones, radios etc. The Durst Power Converter/Charger increases the nominal voltage to that required to recharge batteries using switchmode technology and once the charger moves from Bulk Mode into Float Mode the charge rate is reduced to prevent over charging thereby maintaining optimal battery charge. Don’t hesitate to give us a call for assistance with any problem that you may have.

Available in the following configurations:
12V to 12V, Nominal Input Voltage
12V, Output Charge Voltage 13.8V @ 8Amp
12V to 12V, Nominal Input Voltage
12V, Output Charge Voltage 13.8V @ 20Amp
12V to 24V, Nominal Input Voltage
12V, Output Charge Voltage 27.6V @ 5Amp
24V to 12V available upon request.

	HOME
Copyright  2003-09, Durst Motor and Electric Industries Pty Limited Phone: intl+ 61 2 9660 1755  Email: sales@Durst.com.au
Images are not to any scale.  Specifications are subject to change without notice. Any errors, inaccuracies or misdescriptions must be accepted.